Capacitor discharge welding (CD) involves the same basic principles and metallurgical aspects as any other arc welding procedure. When the weld gun is activated, a special precision weld tip initiates a controlled electric arc from the welder capacitor bank which melts the end of the stud and a portion of the base metal. The stud is held in place as the molten metal solidifies, instantly accomplishing a high quality fusion weld where the weld is stronger than the stud itself. 

CD stud welding is generally used to weld smaller diameter studs to thin base metal, especially where reverse side marking is not permissible. Since the entire weld cycle is completed in milliseconds, welds can be made to thin material without pronounced distortion, burn-through or reverse side discoloration. As long as one end of the stud is designed for CD welding, CD studs can be manufactured in almost any shape. 

© 2002 Cold Headed Fasteners. All Rights Reserved

Website by Advance Design